ISO1450BDWR vs ISO1432DWR موازنہ
تفصیلی ساتھ ساتھ موازنہ از ISO1450BDWR بذریعہ Texas Instruments اور ISO1432DWR بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ فعالTexas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | ISO1450BDWR | ISO1432DWR |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Interface ICs | Drivers, Receivers, Transceivers |
| لائف سائیکل کی حالت | فعال | فعال |
| فنکشن | Isolated half-duplex RS-485 / RS-422 transceiver | Transceiver, Isolated |
| Data Rate (max) | 50 Mbps | 12 Mbps |
| Isolation Voltage (rms) | 5 kVrms (reinforced) | — |
| Number of Drivers / Receivers | 1/1 | — |
| Duplex | Half | Full |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis voltage] | [DATA_NEEDED: typical value] |
| Supply Voltage VCC1 (logic side) | 3 V to 5.5 V | — |
| Supply Voltage VCC2 (bus side) | Internally generated by isolated DC-DC | — |
| Bus Pin ESD (IEC 61000-4-2) | ±16 kV (air / contact, per datasheet) | — |
| Bus Pin ESD (HBM) | ±4 kV | [DATA_NEEDED: HBM rating] |
| IEC 61000-4-4 EFT Immunity | ±4 kV | — |
| Surge Immunity | [DATA_NEEDED: IEC 61000-4-5 surge rating] | — |
| Unit Load | 1/8 (up to 256 nodes on bus) | — |
| Common-Mode Range | Wide common-mode bus voltage range (per datasheet) | — |
| تھرمل شٹ ڈاؤن | Yes | — |
| Current Limiting | Yes | — |
| Low-Power Standby | Yes | — |
| آپریٹنگ درجہ حرارت | -40C to +125C | -40 °C to +125 °C |
| پیکیج | SOIC-16 wide-body (DW), 16 pins | 16-pin SOIC (DW) |
| ماؤنٹنگ ٹائپ | Surface Mount | Surface Mount |
| MSL لیول | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL rating] |
| RoHS اسٹیٹس | Compliant | Compliant |
| Compliance Standards | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Isolation Voltage | — | 5000 Vrms (reinforced) |
| Supply Voltage (Vcc1, Vcc2) | — | 3 V to 5.5 V |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: CMTI value] |
| UL Recognition | — | UL 1577 recognized |
| Lead-Free | — | Yes |