ITS4141NHUMA1 vs ITS4140NHUMA1 तुलना

विस्तृत दोनों ओर की तुलना ITS4141NHUMA1 द्वारा Infineon और ITS4140NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
ITS4141NHUMA1 ITS4141NHUMA1 - 700mA Smart High-Side Switch | Infineon PROFET

ITS4141NHUMA1 - 700mA Smart High-Side Switch | Infineon PROFET

ITS4141NHUMA1 ✓ सक्रिय
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर ITS4141NHUMA1 ITS4140NHUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
टोपोलॉजी High-side N-channel MOSFET switch with charge pump 1:1 (Input to Output)
आउटपुट कॉन्फ़िगरेशन 1:1 (single channel) —
Load Supply Voltage (V_S) -10 V to 48 V (operational); 12 V to 45 V nominal per datasheet —
Continuous Output Current 700 mA —
On-State Resistance R_DS(on) 200 mΩ (typ, 25 °C) —
Input Logic Level CMOS-compatible 3.3 V / 5 V —
Overvoltage Protection Load-dump tolerant Yes (including load dump)
Short-Circuit Protection Current limitation Yes (current limit + thermal shutdown)
Undervoltage Shutdown Auto-restart with hysteresis —
Status Output Open-drain diagnostic pin —
ऑपरेटिंग तापमान -40 °C to +85 °C —
पैकेज PG-SOT223-4 (TO-261-4, 3 leads + tab) PG-SOT223-4 (3+Tab)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 1 (per JEDEC J-STD-020) 1 (per JEDEC J-STD-020)
RoHS स्थिति Compliant Compliant
Product Family PROFET Industrial (ITS41x1N) —
फ़ंक्शन — High-Side Power Switch / Load Driver
Switch Type — N-Channel (vertical, integrated)
Output Current (Continuous) — 200 mA
Supply Voltage Range (Vbb) — 4.9 V to 60 V
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Overload Protection — Yes
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
ऑपरेटिंग तापमान रेंज — -40 C to +125 C
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध