ITS4141NHUMA1 vs ITS4140NHUMA1 So sánh

So sánh chi tiết song song của ITS4141NHUMA1 bằng Infineon và ITS4140NHUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
ITS4141NHUMA1 ITS4141NHUMA1 - 700mA Smart High-Side Switch | Infineon PROFET

ITS4141NHUMA1 - 700mA Smart High-Side Switch | Infineon PROFET

ITS4141NHUMA1 ✓ Hoạt động
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ITS4141NHUMA1 ITS4140NHUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Cấu trúc High-side N-channel MOSFET switch with charge pump 1:1 (Input to Output)
Cấu hình đầu ra 1:1 (single channel) —
Load Supply Voltage (V_S) -10 V to 48 V (operational); 12 V to 45 V nominal per datasheet —
Continuous Output Current 700 mA —
On-State Resistance R_DS(on) 200 mΩ (typ, 25 °C) —
Input Logic Level CMOS-compatible 3.3 V / 5 V —
Overvoltage Protection Load-dump tolerant Yes (including load dump)
Short-Circuit Protection Current limitation Yes (current limit + thermal shutdown)
Undervoltage Shutdown Auto-restart with hysteresis —
Status Output Open-drain diagnostic pin —
Nhiệt độ hoạt động -40 °C to +85 °C —
Hộp PG-SOT223-4 (TO-261-4, 3 leads + tab) PG-SOT223-4 (3+Tab)
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL 1 (per JEDEC J-STD-020) 1 (per JEDEC J-STD-020)
Trạng thái RoHS Compliant Compliant
Product Family PROFET Industrial (ITS41x1N) —
Chức năng — High-Side Power Switch / Load Driver
Switch Type — N-Channel (vertical, integrated)
Output Current (Continuous) — 200 mA
Supply Voltage Range (Vbb) — 4.9 V to 60 V
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Overload Protection — Yes
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
Khoảng nhiệt độ hoạt động — -40 C to +125 C
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá