KSZ8041TL vs KSZ8041FTL-S तुलना

विस्तृत दोनों ओर की तुलना KSZ8041TL द्वारा Microchip Technology और KSZ8041FTL-S द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ सक्रिय
Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ सक्रिय

विशेषता तुलना

पैरामीटर KSZ8041TL KSZ8041FTL-S
ब्रांड Microchip Technology Microchip Technology
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver 10/100 Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver —
पैकेज 48-TQFP (7 x 7 mm) 48-TQFP, 7 x 7 mm
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई वोल्टेज [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Ethernet Standards — 10Base-T and 100Base-TX
Host Interface — MII, RMII, and SMII
Number of Transmitters — 1 channel
Number of Receivers — 1 channel
Supply Voltage Range — 3.135 V to 3.465 V
Supply Type — Single supply
Auto MDI/MDIX Support — HP Auto MDI/MDIX
पिन काउंट — 48 pins
डेटा दर — 10 Mb/s and 100 Mb/s
Mixed-Signal Architecture — Extended signaling distance and reduced power consumption
Configuration Strapping — Speed, duplex, auto-negotiation, power-down, and PHY address
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध