KSZ8041TL vs KSZ8041FTL-S Karşılaştırma

Ayrıntılı yan yana karşılaştırma KSZ8041TL tarafından Microchip Technology ve KSZ8041FTL-S tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Aktif
Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ Aktif

Özellik Karşılaştırması

Parametre KSZ8041TL KSZ8041FTL-S
Marka Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver 10/100 Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver —
Paket 48-TQFP (7 x 7 mm) 48-TQFP, 7 x 7 mm
Montaj Türü Surface mount Surface mount
İşletim Sıcaklığı [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Besleme Gerilimi [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
RoHS Durumu [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Ethernet Standards — 10Base-T and 100Base-TX
Host Interface — MII, RMII, and SMII
Number of Transmitters — 1 channel
Number of Receivers — 1 channel
Supply Voltage Range — 3.135 V to 3.465 V
Supply Type — Single supply
Auto MDI/MDIX Support — HP Auto MDI/MDIX
Pin Sayısı — 48 pins
Veri Hızı — 10 Mb/s and 100 Mb/s
Mixed-Signal Architecture — Extended signaling distance and reduced power consumption
Configuration Strapping — Speed, duplex, auto-negotiation, power-down, and PHY address
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin