KSZ8041TL vs KSZ8041FTL-S So sánh

So sánh chi tiết song song của KSZ8041TL bằng Microchip Technology và KSZ8041FTL-S bằng Microchip Technology. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Hoạt động
Microchip Technology
KSZ8041FTL-S KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S - 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTL-S ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số KSZ8041TL KSZ8041FTL-S
Thương hiệu Microchip Technology Microchip Technology
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 10BASE-T/100BASE-TX Ethernet physical-layer transceiver 10/100 Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s —
Host Interfaces MII, RMII, and SMII —
Supply Architecture Single-supply —
Cable Standard 10BASE-T and 100BASE-TX —
Mixed-Signal Design Yes; intended to extend signaling distance while reducing power consumption —
Auto MDI/MDIX HP Auto MDI/MDIX —
Interrupt Signal INTRP on pin 32; optional PHY-register status-update signal —
Number of Drivers/Receivers 1 driver and 1 receiver —
Device Type Ethernet interface IC / physical-layer transceiver —
Hộp 48-TQFP (7 x 7 mm) 48-TQFP, 7 x 7 mm
Kiểu lắp đặt Surface mount Surface mount
Nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Điện áp cung cấp [DATA_NEEDED: supply voltage range] —
Interface Clock [DATA_NEEDED: clock frequency] —
Ethernet Magnetics [DATA_NEEDED: supported magnetics and isolation configuration] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Ethernet Standards — 10Base-T and 100Base-TX
Host Interface — MII, RMII, and SMII
Number of Transmitters — 1 channel
Number of Receivers — 1 channel
Supply Voltage Range — 3.135 V to 3.465 V
Supply Type — Single supply
Auto MDI/MDIX Support — HP Auto MDI/MDIX
Số chân — 48 pins
Tốc độ dữ liệu — 10 Mb/s and 100 Mb/s
Mixed-Signal Architecture — Extended signaling distance and reduced power consumption
Configuration Strapping — Speed, duplex, auto-negotiation, power-down, and PHY address
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá