LM393DR vs LM393AM तुलना
विस्तृत दोनों ओर की तुलना LM393DR द्वारा Texas Instruments और LM393AM द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
LM393DR - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments
LM393DR ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | LM393DR | LM393AM |
|---|---|---|
| ब्रांड | Texas Instruments | onsemi |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Texas Instruments | — |
| Part Number | LM393DR | — |
| फ़ंक्शन | Dual Differential Comparator | — |
| Number of Channels | 2 | 2 channels |
| आउटपुट प्रकार | Open-Collector | Open collector |
| Supply Voltage (Single) | 2 V to 36 V | — |
| Supply Voltage (Dual) | ±1 V to ±18 V | — |
| Input Offset Voltage (typical) | 1 mV | — |
| Input Bias Current (typical) | 25 nA | — |
| Supply Current per Comparator | 0.4 mA (typical) | — |
| Response Time | 1.3 µs (typical) | — |
| Common-Mode Input Range | 0 V to VCC − 1.5 V | — |
| ऑपरेटिंग तापमान रेंज | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| पैकेज | SOIC-8 (D), 3.90 mm body width | 8-SOIC |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| ESD Rating (HBM, B-version) | 2 kV | — |
| RoHS स्थिति | Compliant | unknown |
| Lead-Free | Yes | — |
| Comparator Type | — | Dual differential comparator |
| Single-Supply Operating Voltage | — | 36 V maximum |
| Dual-Supply Operating Voltage | — | ±18 V maximum |
| Current Drain | — | 800 µA typical |
| Input Bias Current | — | 25 nA typical |
| Logic Compatibility | — | Compatible with all forms of logic |
| Ground-Level Comparison | — | Supported |
| Package Width | — | 3.90 mm (0.154 inch) |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |