LM393DR vs LM393AM Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci LM393DR disebabkan oleh Texas Instruments dan LM393AM disebabkan oleh onsemi. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
LM393DR - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments
LM393DR ✓ Aktif
Pengandingan Spesifikasi
| Parametr | LM393DR | LM393AM |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Texas Instruments | — |
| Part Number | LM393DR | — |
| Fungsi | Dual Differential Comparator | — |
| Number of Channels | 2 | 2 channels |
| Jenis Output | Open-Collector | Open collector |
| Supply Voltage (Single) | 2 V to 36 V | — |
| Supply Voltage (Dual) | ±1 V to ±18 V | — |
| Input Offset Voltage (typical) | 1 mV | — |
| Input Bias Current (typical) | 25 nA | — |
| Supply Current per Comparator | 0.4 mA (typical) | — |
| Response Time | 1.3 µs (typical) | — |
| Common-Mode Input Range | 0 V to VCC − 1.5 V | — |
| Gambaran Suhu Operasi | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| Kemasan | SOIC-8 (D), 3.90 mm body width | 8-SOIC |
| Jenis Pemasangan | Surface Mount | Surface mount |
| ESD Rating (HBM, B-version) | 2 kV | — |
| Status RoHS | Compliant | unknown |
| Lead-Free | Yes | — |
| Comparator Type | — | Dual differential comparator |
| Single-Supply Operating Voltage | — | 36 V maximum |
| Dual-Supply Operating Voltage | — | ±18 V maximum |
| Current Drain | — | 800 µA typical |
| Input Bias Current | — | 25 nA typical |
| Logic Compatibility | — | Compatible with all forms of logic |
| Ground-Level Comparison | — | Supported |
| Package Width | — | 3.90 mm (0.154 inch) |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |