LM393DR vs LM393AM Perbandingan
Perbandingan bersamaan detil LM393DR dari Texas Instruments dan LM393AM dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM393DR - Dual Differential Comparator, 36V, Open-Collector SOIC-8 | Texas Instruments
LM393DR ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | LM393DR | LM393AM |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | Texas Instruments | — |
| Part Number | LM393DR | — |
| Fungsi | Dual Differential Comparator | — |
| Number of Channels | 2 | 2 channels |
| Tipe Output | Open-Collector | Open collector |
| Supply Voltage (Single) | 2 V to 36 V | — |
| Supply Voltage (Dual) | ±1 V to ±18 V | — |
| Input Offset Voltage (typical) | 1 mV | — |
| Input Bias Current (typical) | 25 nA | — |
| Supply Current per Comparator | 0.4 mA (typical) | — |
| Response Time | 1.3 µs (typical) | — |
| Common-Mode Input Range | 0 V to VCC − 1.5 V | — |
| Rentang Suhu Kerja | 0 °C to +70 °C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC-8 (D), 3.90 mm body width | 8-SOIC |
| Tipe Mounting | Surface Mount | Surface mount |
| ESD Rating (HBM, B-version) | 2 kV | — |
| Status RoHS | Compliant | unknown |
| Lead-Free | Yes | — |
| Comparator Type | — | Dual differential comparator |
| Single-Supply Operating Voltage | — | 36 V maximum |
| Dual-Supply Operating Voltage | — | ±18 V maximum |
| Current Drain | — | 800 µA typical |
| Input Bias Current | — | 25 nA typical |
| Logic Compatibility | — | Compatible with all forms of logic |
| Ground-Level Comparison | — | Supported |
| Package Width | — | 3.90 mm (0.154 inch) |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |