LT111A vs LM111-LM211 तुलना

विस्तृत दोनों ओर की तुलना LT111A द्वारा Analog Devices और LM111-LM211 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

विशेषता तुलना

पैरामीटर LT111A LM111-LM211
ब्रांड Analog Devices Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति Obsolete Unknown
Product Type General-purpose voltage comparator Single differential voltage comparator
Maximum Input Offset Voltage 1.0 mV —
Maximum Input Offset Current 5.0 nA —
Maximum Response Time 250 ns —
Supply Configuration Single 5 V to ±15 V —
Differential Input Signal Range ±30 V —
Maximum Output Load Current 50 mA referenced to ground or either supply —
Output Ground Separate output ground pin —
Input Offset Balancing Supported —
Strobe Capability Supported —
Output OR Capability Supported —
Positive Input Voltage Limit 30 V above negative supply —
Negative Input Voltage Limit Negative supply —
Maximum Junction Temperature 150 °C —
पैकेज TO-5 [DATA_NEEDED: selected orderable package for LM111-LM211 family]
माउंटिंग प्रकार [DATA_NEEDED: mounting type] [DATA_NEEDED: selected orderable package mounting type]
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
RoHS स्थिति [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] unknown
Comparator Family — LM111, LM211, LM311
Supply Compatibility — ±15 V and single +5 V supplies
Input Configuration — Differential
Input Current — Low input current; exact maximum value depends on selected variant
आउटपुट प्रकार — Open-collector
Logic Compatibility — Compatible with most TTL and MOS circuits
LM111-N Operating Temperature — −55°C to +125°C
LM211-N Operating Temperature — −25°C to +85°C
LM311-N Operating Temperature — 0°C to +70°C
LM111-N Pin Configuration — Same as LM106 and LM710, according to TI product information
Typical Applications — Precision squaring and peak detection
Comparator Function — Compares two input voltages and provides a logic output
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range for selected package and variant]
Input Offset Voltage — [DATA_NEEDED: input offset voltage for selected variant]
Propagation Delay — [DATA_NEEDED: propagation delay for selected variant and test conditions]
Output Pull-Up Requirement — [DATA_NEEDED: recommended pull-up resistor and pull-up voltage]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध