LT111A vs LM111-LM211 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LT111A sa pamamagitan ng Analog Devices at LM111-LM211 sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
LM111-LM211 - High-Speed Differential Comparator | Texas Instruments
LM111-LM211 UnknownPagsanggunian na paghahambing
| Parametro | LT111A | LM111-LM211 |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Obsolete | Unknown |
| Product Type | General-purpose voltage comparator | Single differential voltage comparator |
| Maximum Input Offset Voltage | 1.0 mV | — |
| Maximum Input Offset Current | 5.0 nA | — |
| Maximum Response Time | 250 ns | — |
| Supply Configuration | Single 5 V to ±15 V | — |
| Differential Input Signal Range | ±30 V | — |
| Maximum Output Load Current | 50 mA referenced to ground or either supply | — |
| Output Ground | Separate output ground pin | — |
| Input Offset Balancing | Supported | — |
| Strobe Capability | Supported | — |
| Output OR Capability | Supported | — |
| Positive Input Voltage Limit | 30 V above negative supply | — |
| Negative Input Voltage Limit | Negative supply | — |
| Maximum Junction Temperature | 150 °C | — |
| Packhaging | TO-5 | [DATA_NEEDED: selected orderable package for LM111-LM211 family] |
| Uri ng Pagpapasok | [DATA_NEEDED: mounting type] | [DATA_NEEDED: selected orderable package mounting type] |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | unknown |
| Comparator Family | — | LM111, LM211, LM311 |
| Supply Compatibility | — | ±15 V and single +5 V supplies |
| Input Configuration | — | Differential |
| Input Current | — | Low input current; exact maximum value depends on selected variant |
| Type ng Output | — | Open-collector |
| Logic Compatibility | — | Compatible with most TTL and MOS circuits |
| LM111-N Operating Temperature | — | −55°C to +125°C |
| LM211-N Operating Temperature | — | −25°C to +85°C |
| LM311-N Operating Temperature | — | 0°C to +70°C |
| LM111-N Pin Configuration | — | Same as LM106 and LM710, according to TI product information |
| Typical Applications | — | Precision squaring and peak detection |
| Comparator Function | — | Compares two input voltages and provides a logic output |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range for selected package and variant] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage for selected variant] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay for selected variant and test conditions] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended pull-up resistor and pull-up voltage] |