MAX1069AEUD+T vs LTC2309IF तुलना
विस्तृत दोनों ओर की तुलना MAX1069AEUD+T द्वारा Analog Devices और LTC2309IF द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX1069AEUD+T | LTC2309IF |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 14 bits | 12 bit |
| सैंपलिंग रेट | 58.6 ksps | — |
| Architecture | SAR (Successive Approximation) | SAR (Successive Approximation Register) |
| Number of Input Channels | 1 single-ended | 8 single-ended / 4 differential |
| Input Type | Single-ended analog input | — |
| Analog Supply Voltage | +2.7 V to +5.25 V | — |
| Digital Supply Voltage | [DATA_NEEDED: digital supply range] | — |
| Internal Reference Voltage | +4.096 V | — |
| External Reference Support | [DATA_NEEDED: external REF input range] | — |
| Serial Interface | I2C-compatible 2-wire (Fast-mode and High-speed mode) | — |
| I2C Address Pins | ADD0-ADD3 (up to 16 devices on one bus) | — |
| On-Chip Clock | 4 MHz internal | — |
| Power-Down Mode | Automatic between conversions | — |
| पैकेज | 14-pin TSSOP | 20-TSSOP (FE) |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: temperature grade] | — |
| माउंटिंग प्रकार | Surface Mount | — |
| RoHS स्थिति | Compliant | Compliant (PBF suffix) |
| Lead-Free | Yes | — |
| Conversion Time | — | 1.3 us per channel (typical) |
| Throughput Rate | — | up to 500 ksps (datasheet-dependent) |
| Supply Voltage (VDD) | — | 5 V single supply |
| सप्लाई करंट | — | 300 uA at 1 ksps (typical) |
| Digital Interface | — | I2C-compatible, standard / fast / high-speed modes |
| I2C Address Selection | — | 2 pins (AD0, AD1) - up to 4 devices on one bus |
| Internal Reference | — | 2.5 V, 10 ppm/C typical drift |
| External Reference Input (REFIN) | — | Yes, supports ratiometric operation |
| Sample-and-Hold | — | Fully differential, common-mode noise rejection |
| Analog Input Range | — | 0 V to VDD (unipolar); +/-VREF differential |
| Operating Temperature Range (I grade) | — | -40 C to +85 C |
| शटडाउन करंट | — | Nap / I2C power-down supported |