MAX1177CCUP+T vs MAX1081BCUP तुलना

विस्तृत दोनों ओर की तुलना MAX1177CCUP+T द्वारा Maxim Integrated और MAX1081BCUP द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Maxim Integrated
MAX1177CCUP+T MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T - 16-Bit 135ksps SAR ADC with Bipolar Input | Maxim

MAX1177CCUP+T ✓ सक्रिय
Analog Devices
MAX1081BCUP MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated

MAX1081BCUP - 10-Bit 300/400ksps 8-CH Serial ADC | Maxim Integrated

MAX1081BCUP ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX1177CCUP+T MAX1081BCUP
ब्रांड Maxim Integrated Analog Devices
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
रेज़ोल्यूशन 16 bits 10 bit
Sample Rate 135 ksps (max) —
Conversion Architecture SAR (Successive Approximation) —
Number of Input Channels 1 (single-ended analog input) 8 (single-ended) / 4 (differential, software-configurable)
Analog Input Range Bipolar (single-supply, true bipolar input per datasheet) 0 V to VREF (unipolar) or +/- VREF (bipolar)
Supply Voltage (AVDD) 4.2 V nominal (single supply) —
Digital Interface Parallel (byte-wide) —
Internal Clock Yes (factory-trimmed) —
Automatic Power-Down Yes (auto power-down between conversions) —
Track-and-Hold Yes (input T/H included) —
Package Type TSSOP-20 (MO-153AC, 4.40 mm body width) —
पिन काउंट 20 —
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान 0 C to +70 C (commercial grade) —
Screening Level Commercial —
सैंपलिंग रेट — 400 ksps (external clock, MAX1081) / 300 ksps (internal clock)
सप्लाई वोल्टेज — +2.7 V to +3.6 V (single supply, MAX1081)
Supply Current (Normal Operation) — 2.5 mA typical
Supply Current (Full Power-Down) — <= 10 uA (FULLPD mode)
Internal Reference Voltage — +2.5 V
Architecture — SAR (Successive Approximation Register)
इंटरफ़ेस — SPI / QSPI / MICROWIRE-compatible serial
Shutdown Pin — Active-low SHDN
Power Modes — Normal, REDP, FASTPD, FULLPD (AutoShutdown at end of conversion)
Integral Nonlinearity (INL) — [DATA_NEEDED: INL]
Differential Nonlinearity (DNL) — [DATA_NEEDED: DNL]
Signal-to-Noise + Distortion (SINAD) — [DATA_NEEDED: SINAD]
पैकेज — 20-pin TSSOP
ऑपरेटिंग तापमान रेंज — 0C to +70C (commercial, 'C' suffix)
RoHS स्थिति — Compliant (MAX1081BCUP+)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध