MAX202ESE-TG068 vs MAX202ECSE+TG068 तुलना

विस्तृत दोनों ओर की तुलना MAX202ESE-TG068 द्वारा Analog Devices और MAX202ECSE+TG068 द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX202ESE-TG068 MAX202ESE-TG068 - 5V RS-232 Transceiver | Analog Devices

MAX202ESE-TG068 - 5V RS-232 Transceiver | Analog Devices

MAX202ESE-TG068 ✓ सक्रिय
Analog Devices
MAX202ECSE+TG068 MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX202ESE-TG068 MAX202ECSE+TG068
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type RS-232 transceiver —
Channel Configuration 2 driver / 2 receiver —
सप्लाई वोल्टेज 5 V —
डेटा दर In excess of 120 kbps [DATA_NEEDED: maximum data rate]
RS-232 Output Signal Levels Plus or minus 5 V —
Interface Standard EIA/TIA-232E —
External Charge-Pump Capacitor 0.1 uF —
पैकेज 16-pin SOIC 16-SOIC, 0.154 in x 3.90 mm width
माउंटिंग प्रकार Surface mount Surface mount
Transceiver Type Full-duplex —
Logic Compatibility [DATA_NEEDED: logic compatibility] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: supply current] [DATA_NEEDED: typical and maximum supply current]
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Driver Output Resistance [DATA_NEEDED: driver output resistance] —
RoHS स्थिति RoHS [DATA_NEEDED: RoHS status]
Number of Drivers — 2
Number of Receivers — 2
Transceiver Configuration — 2/2 full RS-232
Supported Protocol — RS-232
Supply Voltage Range — 4.5 V to 5.5 V
ESD Protection — 15 kV
Packaging — Tape and reel
पिन की संख्या — 16
Driver Output Count — 2
Receiver Input Count — 2
Communication Mode — Full duplex
Operating Voltage — 4.5 V to 5.5 V
Output High and Low Levels — [DATA_NEEDED: RS-232 output voltage levels]
Input Hysteresis — [DATA_NEEDED: receiver input hysteresis]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध