MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices
MPN: MAX202ECSE+TG068 ✓ सक्रियMAX202ECSE+TG068 अवलोकन
An RS-232 transceiver is an interface IC that combines differential signal translation between single-ended logic and RS-232 levels with the electrical isolation required at a communications port. Within the product hierarchy, MAX202ECSE+TG068 is a line driver and receiver, an interface transceiver, and ultimately a semiconductor designed for reliable point-to-point data transmission.
The primary electrical features include two transmit channels, two receive channels, operation from a single 4.5 V to 5.5 V supply, and 15 kV ESD protection. The MAX202E family also emphasizes low power consumption and high-speed transmission, making it suitable for embedded control systems, industrial equipment, and legacy data ports that must exchange serial data over longer cables than logic-level interfaces permit.
The MAX202E implementation includes the charge-pump circuitry required to generate RS-232 transmit voltage levels. This integrated approach avoids external voltage-conversion components and simplifies board layout. Nevertheless, system designers must still account for the non-isolated nature of the interface, provide suitable bypass capacitance, and connect unused driver inputs and receiver outputs to defined logic levels where required.
Typical applications include RS-232 links in industrial controllers, test equipment, point-of-sale terminals, service interfaces, and embedded systems. The two-driver and two-receiver arrangement supports full-duplex communication when two transmitters and two receivers are connected across a communications link. Its 16-SOIC package also allows reuse of the same board footprint across several MAX202 family ordering variants.
For PCB design, place the device close to the connector and route protected and unprotected circuitry according to the manufacturer’s pin-description table and application circuit. Keep switching-node and high-energy transient paths away from receiver inputs, provide the required local bypass capacitors, and verify that the selected cable, connector, and grounding strategy meet the intended RS-232 application.
This page organizes the available ordering information, package details, functional characteristics, practical applications, and same-family drop-in alternatives into an engineering-focused guide for selecting and implementing the MAX202ECSE+TG068.
के लिए ड्रॉप-इन विकल्प MAX202ECSE+TG068 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX202ECSE+TG068 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Transceiver Configuration, ESD Protection, Supply Voltage, Charge Pump.
MAX202ECSE+
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX202ESE+
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX202ESE+T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX202ESE-TG068
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX202ECSE+T
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX202ECSE+TG068 विशेषताएं
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Transceiver Configuration | 2/2 full RS-232 |
| Supported Protocol | RS-232 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| ESD Protection | 15 kV |
| पैकेज | 16-SOIC, 0.154 in x 3.90 mm width |
| Packaging | Tape and reel |
| माउंटिंग प्रकार | Surface mount |
| पिन की संख्या | 16 |
| Driver Output Count | 2 |
| Receiver Input Count | 2 |
| Communication Mode | Full duplex |
| Operating Voltage | 4.5 V to 5.5 V |
MAX202ECSE+TG068 16-soic, 0.154 in x 3.90 mm width पिन कॉन्फ़िगरेशन गाइड
MAX202ECSE+TG068 (16-soic, 0.154 in x 3.90 mm width पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX202ECSE+TG068.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MAX202ECSE+TG068 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Controller RS-232 Port, Test and Measurement Equipment, Embedded Service Interface, Point-of-Sale Terminal, Network Equipment Management Port, Low-Voltage Data Acquisition Unit.
Industrial Controller RS-232 Port
The MAX202ECSE+TG068 suits an industrial controller that must communicate with legacy equipment over RS-232. Its two drivers and two receivers support a full-duplex link, while the 4.5 V to 5.5 V supply range is compatible with a conventional 5 V control rail. The 15 kV ESD protection adds an important protection layer at an exposed connector boundary. Place the transceiver near the connector, route the protected interface through the driver and receiver pins, and keep unrelated switching circuitry away from the interface. Verify operating temperature, isolation strategy, grounding, and cable length before approving the design.
अनुशंसित
Test and Measurement Equipment
The MAX202ECSE+TG068 is appropriate for test equipment that needs a compact, protected serial control or data port. Two RS-232 transmit channels and two receive channels support full-duplex command and response traffic, while the 16-SOIC package preserves board area. The device's stated 15 kV ESD protection is useful when users connect external cables, although it does not replace correct chassis grounding, surge protection, or isolation. Follow the Analog Devices application circuit for bypass capacitors and charge-pump routing, and test the complete cable, connector, and host interface under the intended switching conditions.
अनुशंसित
Embedded Service Interface
The MAX202ECSE+TG068 can provide a service connection for an embedded controller, programmable controller, or industrial embedded system. The 2/2 channel arrangement allows command output and response input on one port, while the low-power, high-speed characteristics of the MAX202E family align with compact embedded equipment. Use the 4.5 V to 5.5 V operating range to establish a robust supply design and follow the manufacturer pin table for enable and unused-pin states. Because RS-232 is not galvanically isolated, include isolation or common-mode protection when the connected equipment can sit at a different ground potential.
अनुशंसित
Point-of-Sale Terminal
A point-of-sale terminal or peripheral can use the MAX202ECSE+TG068 for a two-channel full-duplex RS-232 connection to a printer, scanner, or customer display interface. The integrated drivers and receivers reduce the number of discrete interface components, while the 16-SOIC package supports automated board assembly. The 15 kV ESD rating is particularly relevant around cables that users may connect and disconnect. Position the transceiver near the connector, maintain the recommended bypass layout, and route chassis or surge currents away from logic ground. Confirm signal levels, baud rate, and cable length against the connected peripheral specification.
अनुशंसित
Network Equipment Management Port
The MAX202ECSE+TG068 can implement an RS-232 management or console port on network and communications equipment. The two transmit and two receive channels support full-duplex console traffic, and the single 4.5 V to 5.5 V supply range simplifies connection to a 5 V equipment rail. The integrated charge-pump function allows the transceiver to generate RS-232 levels without external level-shifting components. Position the IC near the serial connector and apply the manufacturer's bypass and routing recommendations. Use a common-mode solution when the console host is electrically isolated or connected through a long cable.
अनुशंसित
Low-Voltage Data Acquisition Unit
The MAX202ECSE+TG068 can serve as the host-side RS-232 interface in a low-voltage data-acquisition unit. A 4.5 V to 5.5 V operating range fits regulated 5 V systems, and the two-driver, two-receiver arrangement accommodates bidirectional commands and measurements. Its 15 kV ESD protection is valuable when the unit is used in a laboratory or industrial setting with frequently connected cables. Follow the MAX202E application circuit for bypass capacitors and keep the interface return path within the equipment grounding design. Validate the maximum data rate, input thresholds, and cable length before selecting it for a particular acquisition protocol.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MAX202ECSE+TG068 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MAX202ECSE+ | MAX202ESE+ | MAX202ESE+T | MAX202ESE-TG068 | MAX202ECSE+T |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Protocol | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| ESD Protection | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV |
| Communication Mode | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
मुख्य विशेषताएँ
- Exact TG068 tape-and-reel ordering configuration (बनामMAX202ESE-TG068)
- Two-channel full-duplex RS-232 interface (बनामMAX202ECSE+)
- Consistent 16-SOIC footprint within the MAX202E family (बनामMAX202ESE+T)
डिज़ाइन नोट्स
Follow the Analog Devices MAX202E application circuit for input and output bypass-capacitor placement, and keep the device close to the RS-232 connector. Separate connector-side transient paths from sensitive logic and clock routing. The package's exposed charge-pump and interface functions require careful grounding, so follow the manufacturer footprint and pin-description table rather than substituting a generic SOIC-16 land pattern without checking exposed-pad and lead details.
Do not assume the E, C, +T, or TG068 suffix has no functional consequence. Confirm lead finish, temperature grade, packing method, and orderable status in the Analog Devices ordering table before approving a substitution. Unused driver inputs and receiver outputs should be assigned definite logic states according to the manufacturer guidance, and the 4.5 V to 5.5 V supply range must be maintained during normal operation and cable transients.
RS-232 is a single-ended interface, so ground offsets and cable transients can affect receiver reliability even when the IC provides 15 kV ESD protection. Use a controlled return path, appropriate connector grounding, and system-level surge or isolation measures where required. Place the transceiver near the connector and avoid sharing high-current return paths between the interface and sensitive logic. Validate the completed assembly against the intended cable length and grounding topology.
अनुपालन जानकारी
The MAX202 family is intended for RS-232 and V.28 communications. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code, so those fields remain unknown.