MAX211CDB vs ADM207AR तुलना
विस्तृत दोनों ओर की तुलना MAX211CDB द्वारा Texas Instruments और ADM207AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | MAX211CDB | ADM207AR |
|---|---|---|
| ब्रांड | Texas Instruments | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Multichannel RS-232 line driver/receiver | RS-232 transceiver |
| सप्लाई वोल्टेज | 5 V | +5 V |
| Driver Count | 4 | 5 |
| Receiver Count | 5 | 3 |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| पैकेज | 28-pin SSOP, 5.30 mm width | 24-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Shutdown Feature | Three driver outputs can be placed in shutdown | Low-power shutdown |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: supply current] |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| डेटा दर | — | 200 kb/s |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| Output Swing | — | 9 V |
| Low Power | — | 15 mW |
| Receiver Input Level | — | 30 V |
| Interface Standard | — | EIA-232-E and V.28 |
| Power-Supply Requirement | — | Single +5 V |
| Transceiver Configuration | — | 5 transmitters and 3 receivers |
| Latch-Up Protection | — | Latch-up free |
| Compatibility | — | Plug-in upgrade for MAX205-211/213 |
| Driver Output Voltage | — | [DATA_NEEDED: minimum and maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |