MAX211CDB vs ADM207AR 比較
詳細並排比較 MAX211CDB 由 Texas Instruments 與 ADM207AR 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX211CDB | ADM207AR |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Multichannel RS-232 line driver/receiver | RS-232 transceiver |
| 供應電壓 | 5 V | +5 V |
| Driver Count | 4 | 5 |
| Receiver Count | 5 | 3 |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| 封裝 | 28-pin SSOP, 5.30 mm width | 24-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| Shutdown Feature | Three driver outputs can be placed in shutdown | Low-power shutdown |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 供應電流 | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: supply current] |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 資料速率 | — | 200 kb/s |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| Output Swing | — | 9 V |
| Low Power | — | 15 mW |
| Receiver Input Level | — | 30 V |
| Interface Standard | — | EIA-232-E and V.28 |
| Power-Supply Requirement | — | Single +5 V |
| Transceiver Configuration | — | 5 transmitters and 3 receivers |
| Latch-Up Protection | — | Latch-up free |
| Compatibility | — | Plug-in upgrade for MAX205-211/213 |
| Driver Output Voltage | — | [DATA_NEEDED: minimum and maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |