MAX211CDB vs ADM207AR Perbandingan
Perbandingan bersamaan detil MAX211CDB dari Texas Instruments dan ADM207AR dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | MAX211CDB | ADM207AR |
|---|---|---|
| Merek | Texas Instruments | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Multichannel RS-232 line driver/receiver | RS-232 transceiver |
| Tegangan Pemuat | 5 V | +5 V |
| Driver Count | 4 | 5 |
| Receiver Count | 5 | 3 |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| Paket | 28-pin SSOP, 5.30 mm width | 24-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Shutdown Feature | Three driver outputs can be placed in shutdown | Low-power shutdown |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Arus Pemuat | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: supply current] |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Laju Data | — | 200 kb/s |
| Charge-Pump Capacitor Value | — | 0.1 µF |
| Output Swing | — | 9 V |
| Low Power | — | 15 mW |
| Receiver Input Level | — | 30 V |
| Interface Standard | — | EIA-232-E and V.28 |
| Power-Supply Requirement | — | Single +5 V |
| Transceiver Configuration | — | 5 transmitters and 3 receivers |
| Latch-Up Protection | — | Latch-up free |
| Compatibility | — | Plug-in upgrade for MAX205-211/213 |
| Driver Output Voltage | — | [DATA_NEEDED: minimum and maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |