MAX211CDB vs LT1039CJ तुलना
विस्तृत दोनों ओर की तुलना MAX211CDB द्वारा Texas Instruments और LT1039CJ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
MAX211CDB - 120 kbit/s 4/5 RS-232 Transceiver | Texas Instruments
MAX211CDB ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | MAX211CDB | LT1039CJ |
|---|---|---|
| ब्रांड | Texas Instruments | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Unknown |
| Product Type | Multichannel RS-232 line driver/receiver | Triple EIA-232 line transceiver |
| सप्लाई वोल्टेज | 5 V | Up to ±15 V |
| Driver Count | 4 | — |
| Receiver Count | 5 | — |
| Maximum Data Rate | 120 kbit/s | — |
| Driver Output Swing | ±9 V | — |
| RS-232 Bus Pin ESD Protection | ±15 kV, human-body model | — |
| Standards Support | TIA/EIA-232-F and ITU V.28 | — |
| पैकेज | 28-pin SSOP, 5.30 mm width | 18-pin DIP |
| माउंटिंग प्रकार | Surface mount | Through-hole |
| Shutdown Feature | Three driver outputs can be placed in shutdown | — |
| Power-Supply Topology | Single 5 V supply with integrated charge-pump circuitry | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| सप्लाई करंट | [DATA_NEEDED: operating supply current] | — |
| Shutdown Supply Current | Low; exact value [DATA_NEEDED: shutdown supply current] | — |
| Driver Input Logic Levels | [DATA_NEEDED: driver input logic thresholds] | — |
| Receiver Output Logic Levels | [DATA_NEEDED: receiver output logic levels] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Drivers | — | 3 |
| Number of Receivers | — | 3 |
| Receiver Input Voltage | — | ±30 V |
| Driver Output Voltage | — | RS-232 levels; outputs can be driven to ±30 V without damage |
| Receiver Input Impedance | — | 30 kΩ nominal |
| Receiver Input Hysteresis | — | 0.4 V |
| Shutdown Output State | — | High impedance |
| Power-Off Output State | — | High impedance when V+ and V− are 0 V |
| Driver Logic Input | — | TTL logic input |
| Receiver Logic Output | — | TTL or CMOS compatible |
| Short Circuit Protection | — | Fully short-circuit protected outputs |
| Temperature Grade | — | [DATA_NEEDED: operating temperature range] |
| Supplier Case | — | DIP18 |