MAX3076EESD+T vs ISL83072EIUZA तुलना
विस्तृत दोनों ओर की तुलना MAX3076EESD+T द्वारा Analog Devices और ISL83072EIUZA द्वारा Renesas Electronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Renesas Electronics
ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas
ISL83072EIUZA ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3076EESD+T | ISL83072EIUZA |
|---|---|---|
| ब्रांड | Analog Devices | Renesas Electronics |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | — |
| Supply Voltage Range | 2.97 V to 3.63 V | — |
| Maximum Data Rate | 16 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| ESD Protection | ±15 kV | — |
| Fail-Safe Receiver | Yes; logic-high output when receiver inputs are open or shorted | — |
| Hot-Swap Support | Yes | — |
| Interface Standards | RS-485 and RS-422 | — |
| पैकेज | 14-pin narrow SOIC, 3.90 mm width | 8-MSOP |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C (industrial) |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver differential threshold] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Protection | [DATA_NEEDED: driver output protection details] | — |
| सप्लाई करंट | [DATA_NEEDED: operating supply current] | — |
| RoHS स्थिति | unknown | Compliant |
| AEC-Q100 Qualification | not_applicable | — |
| फ़ंक्शन | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| डेटा दर | — | 500 kbps (slew-rate limited, per family) |
| सप्लाई वोल्टेज | — | 3.0 V to 3.6 V (single 3.3V supply) |
| Bus ESD Protection (HBM) | — | ±15 kV (RS-485 bus pins) |
| Other-Pin ESD (HBM) | — | >7 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Receiver Fail-Safe | — | Full fail-safe (open, short, terminated, floating) |
| Hot Plug Tolerant | — | Yes (Tx/Rx remain three-state during power-up on versions with enable pins) |