MAX3076EESD+T vs ISL83072EIUZA 比較

詳細並排比較 MAX3076EESD+T 由 Analog Devices 與 ISL83072EIUZA 由 Renesas Electronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
MAX3076EESD+T MAX3076EESD+T - 16Mbps RS-485/RS-422 3.3V Transceiver

MAX3076EESD+T - 16Mbps RS-485/RS-422 3.3V Transceiver

MAX3076EESD+T ✓ 啟用中
Renesas Electronics
ISL83072EIUZA ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas

ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas

ISL83072EIUZA ✓ 啟用中

規格比較

參數 MAX3076EESD+T ISL83072EIUZA
品牌 Analog Devices Renesas Electronics
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type RS-485/RS-422 transceiver —
Supply Voltage Range 2.97 V to 3.63 V —
Maximum Data Rate 16 Mbps —
Driver Count 1 —
Receiver Count 1 —
ESD Protection ±15 kV —
Fail-Safe Receiver Yes; logic-high output when receiver inputs are open or shorted —
Hot-Swap Support Yes —
Interface Standards RS-485 and RS-422 —
封裝 14-pin narrow SOIC, 3.90 mm width 8-MSOP
安裝類型 Surface mount Surface Mount
工作溫度 [DATA_NEEDED: operating temperature range] -40 °C to +85 °C (industrial)
Propagation Delay [DATA_NEEDED: driver and receiver propagation delay] —
Receiver Differential Threshold [DATA_NEEDED: receiver differential threshold] —
Common-Mode Rejection [DATA_NEEDED: common-mode rejection] —
Driver Output Protection [DATA_NEEDED: driver output protection details] —
供應電流 [DATA_NEEDED: operating supply current] —
RoHS 狀態 unknown Compliant
AEC-Q100 Qualification not_applicable —
功能 — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
資料速率 — 500 kbps (slew-rate limited, per family)
供應電壓 — 3.0 V to 3.6 V (single 3.3V supply)
Bus ESD Protection (HBM) — ±15 kV (RS-485 bus pins)
Other-Pin ESD (HBM) — >7 kV
Unit Load — 1/8 unit load (up to 256 nodes)
Receiver Fail-Safe — Full fail-safe (open, short, terminated, floating)
Hot Plug Tolerant — Yes (Tx/Rx remain three-state during power-up on versions with enable pins)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價