MAX3485CPA+ vs ADM3485EAN तुलना

विस्तृत दोनों ओर की तुलना MAX3485CPA+ द्वारा Maxim Integrated और ADM3485EAN द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ सक्रिय
Analog Devices
ADM3485EAN ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3485CPA+ ADM3485EAN
ब्रांड Maxim Integrated Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 transceiver RS-485/RS-422 differential transceiver
सप्लाई वोल्टेज 3.3 V 3.3 V
डेटा दर Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
पैकेज 8-pin PDIP 8-pin SOIC
माउंटिंग प्रकार Through hole Surface mount
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] —
ESD Protection [DATA_NEEDED: device ESD rating] 15 kV
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] Full common-mode range
Slew Rate [DATA_NEEDED: driver slew-rate value] —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Maximum Data Rate — 20 Mbps
Communication Mode — Half-duplex
Standards Compliance — TIA/EIA RS-422 and RS-485
Receiver Input Impedance — 19 kΩ
Maximum Transceivers on Bus — 19 transceivers
Driver and Receiver Enable — Yes
Short-Circuit Protection — Yes
Supply Class — Low-power 3.3 V transceiver

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध