MAX3485CPA+ vs ADM3485EAN Comparação
Comparação detalhada lado a lado de MAX3485CPA+ por Maxim Integrated e ADM3485EAN por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | MAX3485CPA+ | ADM3485EAN |
|---|---|---|
| Marca | Maxim Integrated | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 differential transceiver |
| Tensão de alimentação | 3.3 V | 3.3 V |
| Taxa de dados | Up to 10 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Communication Standard | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | — |
| Encapsulamento | 8-pin PDIP | 8-pin SOIC |
| Tipo de montagem | Through hole | Surface mount |
| Transceiver Configuration | Half-duplex transceiver | — |
| Low-Power Operation | 3.3 V low-power transceiver | — |
| EMI and Reflection Control | Slew-rate-limited driver intended to minimize EMI and cable reflections | — |
| Temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: device ESD rating] | 15 kV |
| Corrente de alimentação | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Differential Output | [DATA_NEEDED: differential output voltage specifications] | — |
| Receiver Input Range | [DATA_NEEDED: receiver differential input range] | — |
| Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | Full common-mode range |
| Slew Rate | [DATA_NEEDED: driver slew-rate value] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Maximum Data Rate | — | 20 Mbps |
| Communication Mode | — | Half-duplex |
| Standards Compliance | — | TIA/EIA RS-422 and RS-485 |
| Receiver Input Impedance | — | 19 kΩ |
| Maximum Transceivers on Bus | — | 19 transceivers |
| Driver and Receiver Enable | — | Yes |
| Short-Circuit Protection | — | Yes |
| Supply Class | — | Low-power 3.3 V transceiver |