MAX3485CPA+ vs ADM3485EAN Сравнение

Подробное сравнение бок о бок MAX3485CPA+ от Maxim Integrated и ADM3485EAN от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Maxim Integrated
MAX3485CPA+ MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Maxim

MAX3485CPA+ ✓ Активен
Analog Devices
ADM3485EAN ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN - 3.3V 20Mbps RS-485/422 Transceiver | ADI

ADM3485EAN ✓ Активен

Сравнение характеристик

Параметр MAX3485CPA+ ADM3485EAN
Бренд Maxim Integrated Analog Devices
Категория Interface ICs Interface ICs
Статус жизненного цикла Активен Активен
Product Type RS-485/RS-422 transceiver RS-485/RS-422 differential transceiver
Напряжение питания 3.3 V 3.3 V
Скорость передачи данных Up to 10 Mbps —
Driver and Receiver Count 1 driver and 1 receiver —
Communication Standard RS-485 and RS-422 —
Driver Architecture Slew-rate limited —
Корпус 8-pin PDIP 8-pin SOIC
Тип монтажа Through hole Surface mount
Transceiver Configuration Half-duplex transceiver —
Low-Power Operation 3.3 V low-power transceiver —
EMI and Reflection Control Slew-rate-limited driver intended to minimize EMI and cable reflections —
Рабочая температура [DATA_NEEDED: operating temperature range] —
ESD Protection [DATA_NEEDED: device ESD rating] 15 kV
Ток потребления [DATA_NEEDED: typical and maximum supply current] —
Driver Differential Output [DATA_NEEDED: differential output voltage specifications] —
Receiver Input Range [DATA_NEEDED: receiver differential input range] —
Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] Full common-mode range
Slew Rate [DATA_NEEDED: driver slew-rate value] —
Статус RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH compliance status]
Maximum Data Rate — 20 Mbps
Communication Mode — Half-duplex
Standards Compliance — TIA/EIA RS-422 and RS-485
Receiver Input Impedance — 19 kΩ
Maximum Transceivers on Bus — 19 transceivers
Driver and Receiver Enable — Yes
Short-Circuit Protection — Yes
Supply Class — Low-power 3.3 V transceiver

Даташиты & ресурсы

Все товары Создать BOM Запросить цену