MAX485EESA+ vs ADM485ANZ तुलना

विस्तृत दोनों ओर की तुलना MAX485EESA+ द्वारा Analog Devices और ADM485ANZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX485EESA+ MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ ✓ सक्रिय
Analog Devices
ADM485ANZ ADM485ANZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485ANZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485ANZ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX485EESA+ ADM485ANZ
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-485/RS-422 Transceiver Differential RS-485/RS-422 line transceiver
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
डेटा दर Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) —
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
पैकेज / केस 8-pin SOIC (SO-8, 3.9 mm body) —
माउंटिंग प्रकार Surface Mount Through-hole
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSL स्तर 1 (Unlimited) —
सप्लाई वोल्टेज — 5 V
Maximum Data Rate — 5 Mbit/s
Transceiver Configuration — 1 transmitter and 1 receiver
Communication Standard — EIA RS-485 and RS-422
Bus Architecture — Bidirectional multipoint bus
Signal Type — Balanced differential
पैकेज — 8-pin PDIP
Temperature Range — Commercial and industrial
Power Class — Low-power
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Differential Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Driver Output Current — [DATA_NEEDED: driver output current]
सप्लाई करंट — [DATA_NEEDED: supply current]
RoHS स्थिति — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध