MAX485EESA+ vs ADM485ANZ 比較
詳細並排比較 MAX485EESA+ 由 Analog Devices 與 ADM485ANZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX485EESA+ | ADM485ANZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 Transceiver | Differential RS-485/RS-422 line transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| 資料速率 | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| 工作溫度範圍 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| 封裝 / 外殼 | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| 安裝類型 | Surface Mount | Through-hole |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSL 等級 | 1 (Unlimited) | — |
| 供應電壓 | — | 5 V |
| Maximum Data Rate | — | 5 Mbit/s |
| Transceiver Configuration | — | 1 transmitter and 1 receiver |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Bus Architecture | — | Bidirectional multipoint bus |
| Signal Type | — | Balanced differential |
| 封裝 | — | 8-pin PDIP |
| Temperature Range | — | Commercial and industrial |
| Power Class | — | Low-power |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Differential Input Sensitivity | — | [DATA_NEEDED: differential input sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| 供應電流 | — | [DATA_NEEDED: supply current] |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |