MAX485EESA+ vs ADM485ANZ 비교

다음의 상세 나란히 비교: MAX485EESA+ 제조: Analog Devices 및 ADM485ANZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

Analog Devices
ADM485ANZ ADM485ANZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485ANZ - 5V 5Mbps RS-485 Transceiver | Analog Devices

ADM485ANZ ✓ 활성

사양 비교

파라미터 MAX485EESA+ ADM485ANZ
브랜드 Analog Devices Analog Devices
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485/RS-422 Transceiver Differential RS-485/RS-422 line transceiver
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
데이터 속도 Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) —
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
동작 온도 범위 -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
패키지 / 케이스 8-pin SOIC (SO-8, 3.9 mm body) —
실장 유형 Surface Mount Through-hole
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSL 레벨 1 (Unlimited) —
공급 전압 — 5 V
Maximum Data Rate — 5 Mbit/s
Transceiver Configuration — 1 transmitter and 1 receiver
Communication Standard — EIA RS-485 and RS-422
Bus Architecture — Bidirectional multipoint bus
Signal Type — Balanced differential
패키지 — 8-pin PDIP
Temperature Range — Commercial and industrial
Power Class — Low-power
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Differential Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
Driver Output Current — [DATA_NEEDED: driver output current]
공급 전류 — [DATA_NEEDED: supply current]
RoHS 상태 — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청