MAX485EESA+T vs SN65HVD05D तुलना
विस्तृत दोनों ओर की तुलना MAX485EESA+T द्वारा Analog Devices और SN65HVD05D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX485EESA+T | SN65HVD05D |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Half-duplex RS-422/RS-485 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Driver Output Type | Slew-rate-limited differential driver | — |
| Receiver Output Type | Differential logic-level receiver | — |
| ESD Protection | ±15 kV | — |
| Communication Mode | Half-duplex | Half-duplex |
| Supported Standards | RS-485 and RS-422 | — |
| पैकेज | 8-pin NSOIC/SOIC | 8-pin SOIC (D) |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Driver and Receiver Count | 1 driver and 1 receiver | 1 differential driver and 1 differential receiver |
| Power Classification | Low-power transceiver | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Minimum Differential Output Voltage | — | 2.5 V into a 54-ohm load |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Driver Output Slew Rate | — | Controlled |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |