MAX485EESA+T vs SN65HVD05D Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX485EESA+T sa pamamagitan ng Analog Devices at SN65HVD05D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX485EESA+T | SN65HVD05D |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Half-duplex RS-485/RS-422 transceiver | Half-duplex RS-422/RS-485 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Driver Output Type | Slew-rate-limited differential driver | — |
| Receiver Output Type | Differential logic-level receiver | — |
| ESD Protection | ±15 kV | — |
| Communication Mode | Half-duplex | Half-duplex |
| Supported Standards | RS-485 and RS-422 | — |
| Packhaging | 8-pin NSOIC/SOIC | 8-pin SOIC (D) |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Driver and Receiver Count | 1 driver and 1 receiver | 1 differential driver and 1 differential receiver |
| Power Classification | Low-power transceiver | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Minimum Differential Output Voltage | — | 2.5 V into a 54-ohm load |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Driver Output Slew Rate | — | Controlled |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |