MAX485EESA+T vs SN65HVD05D 比較

詳細並排比較 MAX485EESA+T 由 Analog Devices 與 SN65HVD05D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ 啟用中
Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ 啟用中

規格比較

參數 MAX485EESA+T SN65HVD05D
品牌 Analog Devices Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Half-duplex RS-485/RS-422 transceiver Half-duplex RS-422/RS-485 transceiver
Supply Voltage Range 4.75 V to 5.25 V 4.5 V to 5.5 V
Nominal Supply Voltage 5 V —
Maximum Data Rate 2.5 Mbps —
Driver Output Type Slew-rate-limited differential driver —
Receiver Output Type Differential logic-level receiver —
ESD Protection ±15 kV —
Communication Mode Half-duplex Half-duplex
Supported Standards RS-485 and RS-422 —
封裝 8-pin NSOIC/SOIC 8-pin SOIC (D)
安裝類型 Surface mount Surface mount
工作溫度範圍 -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
Driver and Receiver Count 1 driver and 1 receiver 1 differential driver and 1 differential receiver
Power Classification Low-power transceiver —
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
MSL [DATA_NEEDED: moisture sensitivity level] —
Maximum Bus Length [DATA_NEEDED: maximum bus length] —
Minimum Differential Output Voltage — 2.5 V into a 54-ohm load
Driver Output State — 3-state
Receiver Failsafe Behavior — Open-circuit, short-circuit, and idle-bus failsafe
Unit Load Option — 1/8 unit load
Maximum Node Count — Up to 256 nodes on the bus
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Driver Output Slew Rate — Controlled
Standards Compatibility — ANSI TIA/EIA-485-A and ISO 8482E
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價