MK64FN1M0VLL12 vs MK24FN1M0VLL12 तुलना
विस्तृत दोनों ओर की तुलना MK64FN1M0VLL12 द्वारा NXP Semiconductors और MK24FN1M0VLL12 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MK64FN1M0VLL12 | MK24FN1M0VLL12 |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | — |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +105 C (industrial) | -40C to +105C |
| पैकेज / केस | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | — |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | — |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 16-bit SAR ADC |
| DAC | 12-bit | — |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL Level] |
| Core Architecture | — | ARM Cortex-M4F with FPU and DSP |
| Flash Memory | — | 1 MB |
| SRAM | — | 256 KB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| पैकेज | — | 100-LQFP (LL) |
| पिन काउंट | — | 100 |
| GPIO Count | — | Up to 80 |
| USB Controller | — | USB 2.0 OTG Full-Speed (Device/Host/OTG) |
| CAN | — | 2 x FlexCAN |
| Operating Voltage | — | 1.8 V / 2.5 V / 3.3 V |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | < 340 nA |
| Wake-Up Time from Stop | — | 4.5 us |
| Low-Leakage Wake-Up Unit | — | Yes |