MK64FN1M0VLL12 vs MK24FN1M0VLL12 Perbandingan
Perbandingan bersamaan detil MK64FN1M0VLL12 dari NXP Semiconductors dan MK24FN1M0VLL12 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MK64FN1M0VLL12 | MK24FN1M0VLL12 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | — |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| Rentang Suhu Kerja | -40 C to +105 C (industrial) | -40C to +105C |
| Paket / Case | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | — |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | — |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 16-bit SAR ADC |
| DAC | 12-bit | — |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| Status RoHS | Compliant | Compliant |
| Level MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL Level] |
| Core Architecture | — | ARM Cortex-M4F with FPU and DSP |
| Flash Memory | — | 1 MB |
| SRAM | — | 256 KB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Paket | — | 100-LQFP (LL) |
| Jumlah Pin | — | 100 |
| GPIO Count | — | Up to 80 |
| USB Controller | — | USB 2.0 OTG Full-Speed (Device/Host/OTG) |
| CAN | — | 2 x FlexCAN |
| Operating Voltage | — | 1.8 V / 2.5 V / 3.3 V |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | < 340 nA |
| Wake-Up Time from Stop | — | 4.5 us |
| Low-Leakage Wake-Up Unit | — | Yes |