MPXC2011DT1 vs MPX2010DP तुलना
विस्तृत दोनों ओर की तुलना MPXC2011DT1 द्वारा NXP Semiconductors और MPX2010DP द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MPXC2011DT1 | MPX2010DP |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Full-Scale Output | 25 mV typical at 10 V excitation | — |
| Sensitivity | 2.5 mV/kPa typical | — |
| Excitation Voltage | 3 V DC to 10 V DC (10 V nominal) | — |
| आउटपुट प्रकार | Analog Wheatstone bridge (ratiometric) | Analog voltage, Wheatstone bridge (mV level) |
| पैकेज | 4-SSIP Chip Pak module, side port | — |
| Port Style | Female, 3.25 mm (0.128 in) barbed side port | — |
| Termination Style | Through-hole PCB, 4 leads | — |
| ऑपरेटिंग तापमान | 0 °C to +85 °C | -40 °C to +125 °C |
| Compensation | On-chip temperature compensated and calibrated | — |
| Technology | Piezoresistive silicon strain gauge | Piezoresistive (silicon strain gauge bridge) |
| Module Dimensions | 7.6 mm x 12.8 mm nominal | — |
| माउंटिंग प्रकार | Through-hole (PCB mount with side-port tubing) | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status not in web data] | Compliant |
| सेंसर प्रकार | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| सप्लाई वोल्टेज | — | 10 V DC typical (max 16 V) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |