MPXC2011DT1 vs MPX2010DP Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPXC2011DT1 tarafından NXP Semiconductors ve MPX2010DP tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
NXP Semiconductors
MPXC2011DT1 - 10kPa Differential Pressure Sensor 4-SSIP | NXP
MPXC2011DT1 ✓ AktifÖzellik Karşılaştırması
| Parametre | MPXC2011DT1 | MPX2010DP |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Full-Scale Output | 25 mV typical at 10 V excitation | — |
| Sensitivity | 2.5 mV/kPa typical | — |
| Excitation Voltage | 3 V DC to 10 V DC (10 V nominal) | — |
| Çıkış Türü | Analog Wheatstone bridge (ratiometric) | Analog voltage, Wheatstone bridge (mV level) |
| Paket | 4-SSIP Chip Pak module, side port | — |
| Port Style | Female, 3.25 mm (0.128 in) barbed side port | — |
| Termination Style | Through-hole PCB, 4 leads | — |
| İşletim Sıcaklığı | 0 °C to +85 °C | -40 °C to +125 °C |
| Compensation | On-chip temperature compensated and calibrated | — |
| Technology | Piezoresistive silicon strain gauge | Piezoresistive (silicon strain gauge bridge) |
| Module Dimensions | 7.6 mm x 12.8 mm nominal | — |
| Montaj Türü | Through-hole (PCB mount with side-port tubing) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status not in web data] | Compliant |
| Duyarlılık Türü | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Besleme Gerilimi | — | 10 V DC typical (max 16 V) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |