MPXH6115AC6T1 vs MP3H6115A6U तुलना
विस्तृत दोनों ओर की तुलना MPXH6115AC6T1 द्वारा STMicroelectronics और MP3H6115A6U द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
MPXH6115AC6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXH6115AC6T1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MPXH6115AC6T1 | MP3H6115A6U |
|---|---|---|
| ब्रांड | STMicroelectronics | NXP Semiconductors |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0.2 V to 4.7 V (at VCC = 5.0 V) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| सप्लाई करंट | [DATA_NEEDED: typical supply current] | — |
| Accuracy | 1.5% (over compensated temperature range) | High accuracy at high temperature (per datasheet) |
| Temperature Compensation Range | -40 C to +125 C | — |
| आउटपुट प्रकार | Analog, ratiometric | Analog, ratiometric |
| पैकेज / केस | 8-SSOP (0.335", 8.50 mm width), Top Port | — |
| Pressure Port | Male 0.13" (3.3 mm) tube, top-side | Male - 0.13 inch (3.3 mm) tube |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान | -40 C to +125 C | -40 C to +125 C |
| Media Compatibility | Dry gases (non-corrosive) | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | [DATA_NEEDED: MSL level] | — |
| सेंसर प्रकार | — | Absolute pressure sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| सप्लाई वोल्टेज | — | 3 V |
| आउटपुट वोल्टेज रेंज | — | 0.12 V to 2.8 V |
| Operating Pressure | — | 15 kPa ~ 115 kPa |
| Temperature Compensation | — | -40 C to +125 C |
| Technology | — | Piezoresistive (MEMS) with bipolar signal conditioning |
| पैकेज | — | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width |
| Signal Conditioning | — | On-chip bipolar op-amp and thin-film resistor network |
| Output Ratiometric | — | Yes (output proportional to VDD) |
| Package Material | — | Durable thermoplastic (PPS) surface-mount package |