MRF6VP3450HR6 vs MRF6VP3450HSR5 तुलना
विस्तृत दोनों ओर की तुलना MRF6VP3450HR6 द्वारा NXP Semiconductors और MRF6VP3450HSR5 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MRF6VP3450HR6 - 860 MHz 450W RF Power MOSFET | NXP Semiconductors
MRF6VP3450HR6 ✓ सक्रियविशेषता तुलना
| पैरामीटर | MRF6VP3450HR6 | MRF6VP3450HSR5 |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | MOSFETs | MOSFETs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | NXP Semiconductors (formerly Freescale) | NXP Semiconductors (formerly Freescale Semiconductor) |
| ट्रांज़िस्टर प्रकार | LDMOS (N-Channel Enhancement-Mode Lateral) | N-Channel Enhancement-Mode Lateral MOSFET (LDMOS) |
| Drain-Source Voltage (VDS) | 50 V | — |
| Rated Voltage | 110 V | — |
| Operating Frequency | 470 MHz to 860 MHz | — |
| Test Frequency | 860 MHz | 860 MHz |
| Output Power (Pout) | 450 W (CW) | 450 W (CW, broadband rating) |
| Test Power Output | 90 W | — |
| Power Gain (Gps) | 22.5 dB at 860 MHz | 22.5 dB typical |
| Drain Current (Test Id) | 1.4 A | — |
| पैकेज / केस | NI-1230 (ceramic, bolt-down) | NI-1230-4S (bolt-down ceramic chassis-mount) |
| Configuration | Single, common-source amplifier | Single, common-source |
| माउंटिंग प्रकार | Chassis-mount, bolted flange | Chassis Mount |
| Technology | Lateral-Diffused MOS (LDMOS) | LDMOS (Laterally Diffused MOS) |
| Application | Broadcast TV transmitter final stage / broadband RF amplifier | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: confirm from current manufacturer data] |
| Frequency Range | — | 470 MHz to 860 MHz |
| Drain-Source Voltage (Vds) Rated | — | 110 V minimum |
| Drain-Source Voltage (Vds) Test | — | 50 V |
| Continuous Drain Current (Id) | — | 1.4 A |
| Pulsed Output Power | — | 90 W (separate pulsed rating) |
| Supplier Device Package | — | NI-1230-4S |
| Operating Mode | — | Class AB (typical for UHF broadcast PAs) |
| Qualification | — | Not Qualified (per partstack listing) |
| Peak Reflow Time | — | 40 s maximum |