MW7IC2040GNR1 vs MW7IC2240NR1 तुलना

विस्तृत दोनों ओर की तुलना MW7IC2040GNR1 द्वारा NXP Semiconductors और MW7IC2240NR1 द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
MW7IC2040GNR1 MW7IC2040GNR1 - 4W RF LDMOS PA, 1.8-1.99 GHz | NXP

MW7IC2040GNR1 - 4W RF LDMOS PA, 1.8-1.99 GHz | NXP

MW7IC2040GNR1 Obsolete
NXP Semiconductors
MW7IC2240NR1 MW7IC2240NR1 - 4W W-CDMA RF LDMOS PA, 2110-2170 MHz | NXP

MW7IC2240NR1 - 4W W-CDMA RF LDMOS PA, 2110-2170 MHz | NXP

MW7IC2240NR1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर MW7IC2040GNR1 MW7IC2240NR1
ब्रांड NXP Semiconductors NXP Semiconductors
श्रेणी RF Amplifiers RF Amplifiers
लाइफसाइकिल स्थिति Obsolete सक्रिय
Manufacturer NXP Semiconductors (formerly Freescale/Motorola) —
Part Family MW7IC2040 (NR1 / GNR1 / NBR1) —
Device Type RF LDMOS Wideband Integrated Power Amplifier —
Frequency Range 1805 MHz to 1990 MHz 2110 MHz to 2170 MHz (usable 2000-2200 MHz)
Output Power (CW) 4 W typical —
Power Supply Voltage 24 V to 32 V (28 V nominal) —
क्वाइसेंट करंट 75 mA (typical, per web data) —
Small-Signal Gain 23.5 dB (typical at 1.99 GHz, per web data) —
RF Type General Purpose / Cellular Base Station PA —
Modulation Support W-CDMA, GSM/EDGE, multi-carrier cellular —
On-Chip Matching Yes (input/output 50 ohm) Yes (input 50 ohm DC-blocked, partial output)
Number of Stages 2 (multi-stage integrated) —
Technology LDMOS (Laterally Diffused MOS) LDMOS (Laterally Diffused MOSFET)
पैकेज / केस TO-270-16 Variant, Gull Wing (TO-270 WBL-16) —
Package Body Material Plastic / Epoxy overmold —
माउंटिंग प्रकार Surface Mount (Gull Wing leads) Surface Mount / flange mount with ground pad
Packaging Tape & Reel —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
ESD Protection Yes (integrated) —
RoHS स्थिति [DATA_NEEDED: RoHS status] —
Lead-Free [DATA_NEEDED: lead-free status] —
हैलोजन फ्री Not Compliant (per GlobalSpec listing) —
फ़ंक्शन — RF Power Amplifier (W-CDMA, multi-stage)
Average Output Power — 4 W (W-CDMA, 28 V)
Power Gain (Min) — 15 dB
Drain Supply Voltage — 24 V to 32 V (28 V typical)
Input VSWR — 5:1
Output VSWR — 5:1
Nominal Impedance — 50 ohm (DC-blocked input, >3 ohm output)
Spurious Emissions — Below -60 dBc from 100 mW to 10 W CW Pout
Quiescent Current Compensation — Integrated with temperature compensation
Enable Function — Yes
पैकेज — TO-270 WBL-16 (TO-270WB16), 16-pin ceramic
Operating Modulation Formats — W-CDMA, TD-SCDMA, LTE-FDD, multi-carrier

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध