NE5532D8G vs NE5532D तुलना

विस्तृत दोनों ओर की तुलना NE5532D8G द्वारा onsemi और NE5532D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

onsemi
NE5532D8G NE5532D8G - Dual Low-Noise Operational Amplifier | onsemi

NE5532D8G - Dual Low-Noise Operational Amplifier | onsemi

NE5532D8G ✓ सक्रिय

विशेषता तुलना

पैरामीटर NE5532D8G NE5532D
ब्रांड onsemi Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Amplifier Type Dual low-noise operational amplifier Dual low-noise operational amplifier
Number of Circuits 2 circuits —
Compensation Internally compensated —
Supply Voltage Range 3 V to 20 V —
Gain-Bandwidth Product 10 MHz —
Slew Rate 9 V/us 10 V/μs typical
Input Noise 1 uV —
Input Offset Voltage 4 mV —
ऑपरेटिंग तापमान Commercial temperature —
पैकेज 8-SOIC 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface Mount
Protection Features Input-protection diodes and output short-circuit protection —
Distributor Classification Instrumentation, op amp, buffer amplifier —
RoHS स्थिति RoHS3 compliant [DATA_NEEDED: RoHS status]
लाइफसाइकिल स्थिति Active —
Number of Amplifier Circuits — 2 circuits
Equivalent Input Noise Voltage — 5 nV/√Hz typical at 1 kHz
Unity-Gain Bandwidth — 10 MHz typical
DC Voltage Gain — 100 V/mV typical
Common-Mode Rejection Ratio — 100 dB typical
Specified Supply Voltage Range — ±5 V to ±15 V
Maximum Total Supply Voltage — 30 V
Output Voltage Swing — 32 V peak-to-peak typical at ±18 V and 600 Ω load
ऑपरेटिंग तापमान रेंज — 0 °C to +70 °C for NE5532x
Product Category — Standard general-purpose amplifier
Application Category — Audio applications
Manufacturer — Texas Instruments
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]
सप्लाई करंट — [DATA_NEEDED: supply current]
Input Bias Current — [DATA_NEEDED: input bias current]
Open-Loop Gain — [DATA_NEEDED: open-loop gain at specified frequency]
Noise at 20 Hz to 20 kHz — [DATA_NEEDED: total input noise over audio bandwidth]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध