NE5532D8G vs NE5532D Perbandingan
Perbandingan bersamaan detil NE5532D8G dari onsemi dan NE5532D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | NE5532D8G | NE5532D |
|---|---|---|
| Merek | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Number of Circuits | 2 circuits | — |
| Compensation | Internally compensated | — |
| Supply Voltage Range | 3 V to 20 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/us | 10 V/μs typical |
| Input Noise | 1 uV | — |
| Input Offset Voltage | 4 mV | — |
| Suhu Kerja | Commercial temperature | — |
| Paket | 8-SOIC | 8-pin SOIC |
| Tipe Mounting | Surface mount | Surface Mount |
| Protection Features | Input-protection diodes and output short-circuit protection | — |
| Distributor Classification | Instrumentation, op amp, buffer amplifier | — |
| Status RoHS | RoHS3 compliant | [DATA_NEEDED: RoHS status] |
| Status Lingkungan Hidup | Active | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Rentang Suhu Kerja | — | 0 °C to +70 °C for NE5532x |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Arus Pemuat | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |