NE5532DR2G vs NE5532D तुलना
विस्तृत दोनों ओर की तुलना NE5532DR2G द्वारा onsemi और NE5532D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ सक्रियविशेषता तुलना
| पैरामीटर | NE5532DR2G | NE5532D |
|---|---|---|
| ब्रांड | onsemi | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Unknown | सक्रिय |
| Amplifier Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Number of Channels | 2 channels | — |
| Compensation | Internally compensated | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Maximum Supply Voltage | 20 V | — |
| पैकेज | 16-SOIC | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| Channel Count | 2 | — |
| Low-Noise Classification | Low noise | — |
| Output Drive | Improved versus the 1458, as stated by the verified product description | — |
| Small-Signal Bandwidth | Considerably higher than the 1458, without a verified numerical value | — |
| Power Bandwidth | Considerably higher than the 1458, without a verified numerical value | — |
| Input Offset Voltage | [DATA_NEEDED: Input Offset Voltage] | — |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Input Noise Density | [DATA_NEEDED: Input Noise Density] | — |
| Slew Rate | [DATA_NEEDED: Slew Rate] | 10 V/μs typical |
| Output Current | [DATA_NEEDED: Output Current] | — |
| क्वाइसेंट करंट | [DATA_NEEDED: Quiescent Current] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: Operating Temperature Range] | 0 °C to +70 °C for NE5532x |
| RoHS स्थिति | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| सप्लाई करंट | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |