NE5532DR2G vs NE5532D So sánh
So sánh chi tiết song song của NE5532DR2G bằng onsemi và NE5532D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | NE5532DR2G | NE5532D |
|---|---|---|
| Thương hiệu | onsemi | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Unknown | Hoạt động |
| Amplifier Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Number of Channels | 2 channels | — |
| Compensation | Internally compensated | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Maximum Supply Voltage | 20 V | — |
| Hộp | 16-SOIC | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Channel Count | 2 | — |
| Low-Noise Classification | Low noise | — |
| Output Drive | Improved versus the 1458, as stated by the verified product description | — |
| Small-Signal Bandwidth | Considerably higher than the 1458, without a verified numerical value | — |
| Power Bandwidth | Considerably higher than the 1458, without a verified numerical value | — |
| Input Offset Voltage | [DATA_NEEDED: Input Offset Voltage] | — |
| Input Bias Current | [DATA_NEEDED: Input Bias Current] | [DATA_NEEDED: input bias current] |
| Input Noise Density | [DATA_NEEDED: Input Noise Density] | — |
| Slew Rate | [DATA_NEEDED: Slew Rate] | 10 V/μs typical |
| Output Current | [DATA_NEEDED: Output Current] | — |
| Điện áp yên tĩnh | [DATA_NEEDED: Quiescent Current] | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: Operating Temperature Range] | 0 °C to +70 °C for NE5532x |
| Trạng thái RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Điện áp cung cấp | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |