NE5532N vs NE5532AP तुलना

विस्तृत दोनों ओर की तुलना NE5532N द्वारा onsemi और NE5532AP द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
NE5532AP NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments

NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments

NE5532AP ✓ सक्रिय

विशेषता तुलना

पैरामीटर NE5532N NE5532AP
ब्रांड onsemi Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति Unknown सक्रिय
Product Type Dual internally compensated operational amplifier —
Number of Circuits 2 —
Amplifier Type General Purpose Low-Noise Operational Amplifier
पैकेज 8-PDIP (0.300 in, 7.62 mm) —
Packaging Tube —
Gain Bandwidth Product 10 MHz —
Slew Rate 9 V/µs [DATA_NEEDED: slew rate V/us]
Compensation Internal frequency compensation —
Noise Performance Low noise —
Output Drive Improved output-drive capability 600 ohm loads (typ.)
Small-Signal Bandwidth High small-signal bandwidth —
Power Bandwidth High power bandwidth —
माउंटिंग स्टाइल Through-hole —
सप्लाई वोल्टेज [DATA_NEEDED: supply voltage] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
Input Bias Current [DATA_NEEDED: input bias current] —
Input Noise Density [DATA_NEEDED: input noise density] —
Output Current [DATA_NEEDED: output current] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] 0 °C to +70 °C (NE5532x commercial)
Manufacturer — Texas Instruments
Part Number — NE5532AP
Number of Channels — 2 (Dual)
पैकेज / केस — 8-PDIP (through-hole, 2.54 mm pitch)
Supply Voltage (Dual) — ±5 V to ±15 V (max ±18 V)
Unity-Gain Bandwidth — 10 MHz (typ.)
Equivalent Input Noise Voltage — 5 nV/√Hz (typ. at 1 kHz)
Common-Mode Rejection Ratio (CMRR) — 100 dB (typ.)
DC Voltage Gain — 100 V/mV (typ., 100 dB)
Peak-to-Peak Output Swing — 32 V typ. (VCC± = ±18 V, RL = 600 ohm)
Input Protection — Input-protection diodes
Output Protection — Output short-circuit protection
माउंटिंग प्रकार — Through-Hole (PDIP)
RoHS स्थिति — Compliant (Pb-free)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध