SN65HVD51D vs SN65HVD53D तुलना

विस्तृत दोनों ओर की तुलना SN65HVD51D द्वारा Texas Instruments और SN65HVD53D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD51D SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD51D ✓ सक्रिय
Texas Instruments
SN65HVD53D SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments

SN65HVD53D ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD51D SN65HVD53D
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type RS-422/RS-485 full-duplex transceiver —
Driver Count 1 driver —
Receiver Count 1 receiver —
Maximum Signaling Rate 5 Mbps —
Supply Voltage Range 4.5 V to 5.5 V [DATA_NEEDED: supply voltage range]
Interface Standards RS-422 and RS-485 —
Duplex Mode Full-duplex —
Receiver Unit Load 1/8 unit load —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 15 kV HBM —
Available Driver Transition Rates 1 Mbps, 5 Mbps, and 25 Mbps —
Standby Current Less than 1 µA 1 uA (both driver and receiver disabled)
ऑपरेटिंग तापमान रेंज -40 °C to 85 °C -40 C to +85 C
पैकेज 8-pin SOIC (D) SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch
माउंटिंग प्रकार Surface mount Surface mount
Enable Architecture Fully enabled; no external enable pins —
RoHS स्थिति [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] —
Device Type — Full-duplex RS-485 / RS-422 transceiver with enables
Number of Drivers / Receivers — 1 / 1
Driver Enable Polarity — Active-high
Receiver Enable Polarity — Active-low
Unit Load Option — 1/8 unit-load option available (up to 256 nodes on the bus)
Maximum Nodes on Bus — 256 nodes
Bus Pin ESD Protection — Exceeds 15 kV HBM
Driver Output Transition Time Options — 1 Mbps, 5 Mbps and 25 Mbps signaling rates
Receiver Output — Glitch-free
Standards Supported — RS-485, RS-422
Maximum Data Rate (this device) — [DATA_NEEDED: maximum data rate for SN65HVD53D]
Driver Output Current — [DATA_NEEDED: high-output driver current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध