SN65HVD51D vs SN65HVD53D השוואה

השוואה מפורטת זה לצד זה של SN65HVD51D מאת Texas Instruments ו SN65HVD53D מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.

השוואת מפרטים

פרמטר SN65HVD51D SN65HVD53D
מותג Texas Instruments Texas Instruments
קטגוריה Interface ICs Interface ICs
סטטוס מחזור חיים פעיל פעיל
Product Type RS-422/RS-485 full-duplex transceiver —
Driver Count 1 driver —
Receiver Count 1 receiver —
Maximum Signaling Rate 5 Mbps —
Supply Voltage Range 4.5 V to 5.5 V [DATA_NEEDED: supply voltage range]
Interface Standards RS-422 and RS-485 —
Duplex Mode Full-duplex —
Receiver Unit Load 1/8 unit load —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 15 kV HBM —
Available Driver Transition Rates 1 Mbps, 5 Mbps, and 25 Mbps —
Standby Current Less than 1 µA 1 uA (both driver and receiver disabled)
טווח טמפרטורת פעולה -40 °C to 85 °C -40 C to +85 C
מארז 8-pin SOIC (D) SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch
סוג הרכבה Surface mount Surface mount
Enable Architecture Fully enabled; no external enable pins —
סטטוס RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] —
Device Type — Full-duplex RS-485 / RS-422 transceiver with enables
Number of Drivers / Receivers — 1 / 1
Driver Enable Polarity — Active-high
Receiver Enable Polarity — Active-low
Unit Load Option — 1/8 unit-load option available (up to 256 nodes on the bus)
Maximum Nodes on Bus — 256 nodes
Bus Pin ESD Protection — Exceeds 15 kV HBM
Driver Output Transition Time Options — 1 Mbps, 5 Mbps and 25 Mbps signaling rates
Receiver Output — Glitch-free
Standards Supported — RS-485, RS-422
Maximum Data Rate (this device) — [DATA_NEEDED: maximum data rate for SN65HVD53D]
Driver Output Current — [DATA_NEEDED: high-output driver current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]

Datasheets ומשאבים

עיין בכל המוצרים צור BOM בקשת הצעת מחיר