SN65HVD77D vs SN65HVD11D तुलना

विस्तृत दोनों ओर की तुलना SN65HVD77D द्वारा Texas Instruments और SN65HVD11D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ सक्रिय
Texas Instruments
SN65HVD11D SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD77D SN65HVD11D
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Full-duplex RS-485 transceiver Differential transceiver
Supply Voltage Range 3.0 V to 3.6 V —
Nominal Supply Voltage 3.3 V —
Maximum Data Rate 50 Mbps —
Number of Drivers 1 —
Number of Receivers 1 —
Duplex Mode Full duplex —
Supported Standards RS-485 and RS-422 —
ESD Protection ±12 kV IEC —
ऑपरेटिंग तापमान रेंज -40°C to 125°C —
पैकेज 8-pin SOIC (D) 8-pin SOIC (D)
Package Width 3.90 mm —
माउंटिंग प्रकार Surface mount Surface mount
External Enable Controls None —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Driver Output Type Differential —
Receiver Output Type Single-ended logic output —
Low-Power Standby Current Less than 5 µA when driver and receiver are disabled —
Termination Requirement External termination required —
Supported Interfaces — RS-485 and RS-422
सप्लाई वोल्टेज — 3.3 V
Driver Output State — Three-state
Receiver Architecture — Differential input
Unit Load — 1/8 unit load
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Standards — ANSI TIA/EIA-485-A and ISO 8482:1993
ऑपरेटिंग तापमान — -40 °C to +85 °C
पिन काउंट — 8 pins
Output Current — [DATA_NEEDED: output current]
डेटा दर — [DATA_NEEDED: maximum data rate]
Differential Output Voltage — [DATA_NEEDED: differential output voltage]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
सप्लाई करंट — [DATA_NEEDED: operating supply current]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध