SN65HVD77D vs SN65HVD11D 比較

詳細並排比較 SN65HVD77D 由 Texas Instruments 與 SN65HVD11D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ 啟用中
Texas Instruments
SN65HVD11D SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D - 3.3V RS-485 Transceiver | Texas Instruments

SN65HVD11D ✓ 啟用中

規格比較

參數 SN65HVD77D SN65HVD11D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Full-duplex RS-485 transceiver Differential transceiver
Supply Voltage Range 3.0 V to 3.6 V —
Nominal Supply Voltage 3.3 V —
Maximum Data Rate 50 Mbps —
Number of Drivers 1 —
Number of Receivers 1 —
Duplex Mode Full duplex —
Supported Standards RS-485 and RS-422 —
ESD Protection ±12 kV IEC —
工作溫度範圍 -40°C to 125°C —
封裝 8-pin SOIC (D) 8-pin SOIC (D)
Package Width 3.90 mm —
安裝類型 Surface mount Surface mount
External Enable Controls None —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
Driver Output Type Differential —
Receiver Output Type Single-ended logic output —
Low-Power Standby Current Less than 5 µA when driver and receiver are disabled —
Termination Requirement External termination required —
Supported Interfaces — RS-485 and RS-422
供應電壓 — 3.3 V
Driver Output State — Three-state
Receiver Architecture — Differential input
Unit Load — 1/8 unit load
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Standards — ANSI TIA/EIA-485-A and ISO 8482:1993
工作溫度 — -40 °C to +85 °C
腳位數 — 8 pins
Output Current — [DATA_NEEDED: output current]
資料速率 — [DATA_NEEDED: maximum data rate]
Differential Output Voltage — [DATA_NEEDED: differential output voltage]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
供應電流 — [DATA_NEEDED: operating supply current]
REACH Status — [DATA_NEEDED: REACH status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價