SP485CN-L vs SN75176BD तुलना
विस्तृत दोनों ओर की तुलना SP485CN-L द्वारा MaxLinear और SN75176BD द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SP485CN-L | SN75176BD |
|---|---|---|
| ब्रांड | MaxLinear | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Transceiver Type | Single transmitter/single receiver half-duplex transceiver | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | [DATA_NEEDED: maximum data rate] |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Logic and Bus Function | Bidifferential half-duplex serial interface | — |
| Architecture | BiCMOS | — |
| Power Class | Low-power operation | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| पैकेज | 8-pin SOIC | SOIC (D), 8 pins |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Temperature Range | 0 C to 70 C | — |
| Bus Topology | Half-duplex differential bus | — |
| Signaling | Differential RS-422/RS-485 | — |
| EMI Behavior | [DATA_NEEDED: slew-rate and transient-emission details] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| क्वाइसेंट करंट | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Termination Requirement | [DATA_NEEDED: manufacturer termination and biasing guidance] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | Differential bus transceiver |
| सप्लाई वोल्टेज | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| ऑपरेटिंग तापमान रेंज | — | 0 °C to 70 °C |
| पिन काउंट | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |