SP485CN-L vs SN75176BD 비교
다음의 상세 나란히 비교: SP485CN-L 제조: MaxLinear 및 SN75176BD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SP485CN-L | SN75176BD |
|---|---|---|
| 브랜드 | MaxLinear | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $0.63 | $0.15 |
| Transceiver Type | Single transmitter/single receiver half-duplex transceiver | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | [DATA_NEEDED: maximum data rate] |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Logic and Bus Function | Bidifferential half-duplex serial interface | — |
| Architecture | BiCMOS | — |
| Power Class | Low-power operation | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| 패키지 | 8-pin SOIC | SOIC (D), 8 pins |
| 실장 유형 | Surface Mount | Surface mount |
| Temperature Range | 0 C to 70 C | — |
| Bus Topology | Half-duplex differential bus | — |
| Signaling | Differential RS-422/RS-485 | — |
| EMI Behavior | [DATA_NEEDED: slew-rate and transient-emission details] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| 대기 전류 | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Termination Requirement | [DATA_NEEDED: manufacturer termination and biasing guidance] | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | Differential bus transceiver |
| 공급 전압 | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| 동작 온도 범위 | — | 0 °C to 70 °C |
| 핀 수 | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |