SP485CN-L vs SN75176BD Сравнение
Подробное сравнение бок о бок SP485CN-L от MaxLinear и SN75176BD от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
SN75176BD - 8-Pin RS-485/RS-422 Transceiver | TI (Tape & Reel)
SN75176BD ✓ АктивенСравнение характеристик
| Параметр | SP485CN-L | SN75176BD |
|---|---|---|
| Бренд | MaxLinear | Texas Instruments |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,63 | $0,15 |
| Transceiver Type | Single transmitter/single receiver half-duplex transceiver | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | [DATA_NEEDED: maximum data rate] |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Logic and Bus Function | Bidifferential half-duplex serial interface | — |
| Architecture | BiCMOS | — |
| Power Class | Low-power operation | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Корпус | 8-pin SOIC | SOIC (D), 8 pins |
| Тип монтажа | Surface Mount | Surface mount |
| Temperature Range | 0 C to 70 C | — |
| Bus Topology | Half-duplex differential bus | — |
| Signaling | Differential RS-422/RS-485 | — |
| EMI Behavior | [DATA_NEEDED: slew-rate and transient-emission details] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| Ток покоя | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Termination Requirement | [DATA_NEEDED: manufacturer termination and biasing guidance] | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | Differential bus transceiver |
| Напряжение питания | — | 5 V |
| Supported Standards | — | TIA/EIA-422-B and TIA/EIA-485-A |
| ITU Recommendations | — | V.11 and X.27 |
| Communication Mode | — | Bidirectional |
| Bus Architecture | — | Multipoint transmission |
| Transmission Line Type | — | Balanced transmission lines |
| Driver Output State | — | 3-state |
| Receiver Output State | — | 3-state |
| Диапазон рабочих температур | — | 0 °C to 70 °C |
| Число выводов | — | 8 pins |
| Manufacturer | — | Texas Instruments |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Input and Output Electrical Limits | — | [DATA_NEEDED: input and output electrical limits] |