SP485EN-L vs MAX485EESA+ तुलना

विस्तृत दोनों ओर की तुलना SP485EN-L द्वारा MaxLinear और MAX485EESA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

MaxLinear
SP485EN-L SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L - 5Mbps RS-485/RS-422 Transceiver | MaxLinear

SP485EN-L ✓ सक्रिय
Analog Devices
MAX485EESA+ MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices

MAX485EESA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर SP485EN-L MAX485EESA+
ब्रांड MaxLinear Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex differential transceiver RS-485/RS-422 Transceiver
Interface Standards RS-422 and RS-485 —
Maximum Data Rate 5 Mbps —
Supply Voltage Range 4.75V to 5.25V —
Nominal Supply Voltage 5 V —
ऑपरेटिंग तापमान रेंज -40°C to +85°C -40 °C to +85 °C
Driver and Receiver Count 1 differential driver and 1 differential receiver —
Duplex Mode Half-duplex —
Receiver Input Type Differential Schmitt-trigger input —
Process Technology BiCMOS —
पैकेज 8-pin SOIC —
Package Width 3.9 mm —
Package Length 4.9 mm —
माउंटिंग प्रकार Surface mount Surface Mount
Transceiver Count per Package 1 —
Supply Decoupling Requirement [DATA_NEEDED: recommended decoupling capacitor value and ESR] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Propagation Delay [DATA_NEEDED: receiver and driver propagation delay] —
Input Impedance [DATA_NEEDED: receiver input impedance] —
Shutdown Function [DATA_NEEDED: shutdown or power-save support] —
RoHS स्थिति unknown —
REACH Status unknown —
AEC-Q100 Qualification [DATA_NEEDED: automotive qualification status] —
Protocol — RS-485, RS-422
Duplex — Half-Duplex
Number of Drivers/Receivers — 1/1
Supply Voltage (VCC) — 4.75 V to 5.25 V
डेटा दर — Up to 2.5 Mbps
ESD Protection (Bus Pins, HBM) — ±15 kV
Driver Slew Rate — Limited (low-EMI)
Quiescent Supply Current — 1 mA (typical)
Number of Nodes on Bus — 32 (1/2 unit load)
Receiver Input Impedance — 96 kΩ (1/2 unit load)
पैकेज / केस — 8-pin SOIC (SO-8, 3.9 mm body)
Lead-Free / RoHS Status — Lead-Free, RoHS compliant
MSL स्तर — 1 (Unlimited)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध